Video Series – Numerical Modeling: Translate and Run Model

//Video Series – Numerical Modeling: Translate and Run Model

Visual MODFLOW Flex Video Series – Numerical Modeling: Translate and Run

In this video, learn how to translate model files and run a groundwater model within the Visual MODFLOW Flex interface. Model translation refers to the process of generating MODFLOW input files based on the model elements defined in Visual MODFLOW Flex. Dozens of translation settings are involved in the generation of these input files, and some of the more important translation settings are discussed here.

Optional steps such as assigning MODPATH particles, ZoneBudget zones and observation/calibration data are also presented. For more information regarding specific translation settings please refer to the VMOD Flex user manual or the USGS MODFLOW documentation.

For more information regarding specific translation settings please refer to the VMOD Flex user manual or the USGS MODFLOW documentation. For more training resources please visit the Visual MODFLOW Flex support page: https://www.waterloohydrogeologic.com/visual-modflow-flex/#tab-5433d64180dfb0b9e20

VMOD Flex user manual: https://www.waterloohydrogeologic.com/help/vmod-flex/

USGS Online Guide to MODFLOW-2005: https://water.usgs.gov/ogw/modflow/MODFLOW-2005-Guide/

2018-12-13T11:44:18-05:00December 13th, 2018|Categories: Blog|Tags: , , , , |

About the Author:

Jennifer is the Marketing Communications Specialist for Waterloo Hydrogeologic.