Groundwater Modeling

//Groundwater Modeling

Experiencing a Non-Convergence Error? Here are some tips.

2017-12-05T09:49:18+00:00 October 20th, 2017|Categories: Blog, Groundwater Modeling, Support|Tags: , , |

No one likes errors, am I right? Errors such as “Solution Non-Convergence” , “Failed to meet solver criteria …”, “Abnormal termination. See file C:\........\ProjectName.LST for details” when running MODFLOW are Non-Convergence messages. This typically occurs when MODFLOW cannot reach a successful simulation result.  Due to the complexity of ground water modelling, non-convergence errors are not unusual.  [...]

Structural Review Webinar: Visual MODFLOW Flex 4.1

2017-08-18T11:50:39+00:00 August 18th, 2017|Categories: Blog, Groundwater Modeling, Training, Visual MODFLOW Flex|Tags: , , , |

Visual MODFLOW Flex 4.1: Our powerful modeling software allows you to do more, in less time, with greater flexibility! We hope you’re enjoying the latest version of Visual MODFLOW Flex. To experience the power of 4.1; why not set aside a few minutes to learn about all the key enhancements through this webinar. Our product [...]

Visual MODFLOW Classic and Windows 10

2017-05-10T09:56:51+00:00 March 10th, 2017|Categories: Blog, Groundwater Modeling, Groundwater Modeling & Simulations, Support, Visual MODFLOW Flex|Tags: , , |

Loyalty is defined as, a strong feeling of support or allegiance. We appreciate how loyal you have been and thank you for the support you have given Visual MODFLOW Classic over the years.  It is a great software program and we're thrilled you've enjoyed it! As technology advances, compatibility challenges have arisen with Classic on newer operating systems. [...]

The New MODFLOW Course: Theory and Hands-On Course NGWA

2017-03-17T14:21:05+00:00 May 18th, 2016|Categories: Events, Groundwater Modeling, MODFLOW-USG, Visual MODFLOW Flex|

Waterloo Hydrogeologic is pleased to partner with the NGWA to present "The New MODFLOW Course: Theory and Hands-On Training" JUNE 14-17, 2016 LAS VEGAS, NEVADA Course instructors Robert "Bob" W. Cleary, Ph.D. & Sharon Wadley, PG. This four-day course alternates between lectures and hands-on laboratory exercises to introduce you to the modeling process including conceptual model development, numerical model implementation, [...]

NGWA Groundwater Summit 2016

2016-11-22T18:26:15+00:00 April 14th, 2016|Categories: Events, Groundwater Modeling|

The 2016 NGWA Groundwater Summit conference is set to kick off on Sunday, April 24th and will run until Wednesday, April 27. Waterloo Hydrogeologic and Van Essen are pleased once again to be official sponsors and exhibitors for this great event. Wayne Hesch, Product Manager from Waterloo Hydrogeologic will be at our booth to discuss recent [...]

Visual MODFLOW Flex 2015.1 Update Released

2016-11-22T18:26:15+00:00 March 31st, 2016|Categories: Groundwater Modeling, Visual MODFLOW Flex|Tags: |

Visual MODFLOW Flex software brings together industry-standard codes for groundwater flow and contaminant transport, essential analysis and calibration tools, and stunning 3D visualization capabilities in a single, easy-to-use environment. What can you expect in this update to Visual MODFLOW Flex? In the updated new build of Visual MODFLOW Flex, both Classic and Flex interfaces add Windows [...]

Troubleshooting Warnings and Errors in Visual MODFLOW Flex

2016-11-22T18:26:15+00:00 February 12th, 2016|Categories: Groundwater Modeling, Support, Visual MODFLOW Flex|Tags: , |

Troubleshooting Warnings and Errors Encountered During Translation of Boundary Condition Packages Drain Boundary Conditions Warning Message: “Drain elevation are below the bottom of the cells. Your model may not converge” This warning message is related to the drain boundary condition in Visual MODFLOW FLEX, during project translation. Since the message is just a "warning", it can simply [...]